Support Frame Thickness Comparison

Eliminates gutter rain gutter cleaning forever!

Advantages of our thicker support frame:

  • Will never collapse inside your gutter.
  • Will never ‘droop’ down into your gutter.
  • Withstands heavy amounts of debris.
  • Will outlast ALL its competitors.
  • Shapes better to old warped and twisted roofs.
  • Holds its pitch over time so debris sheds always

Dis-Advantages of a thinner support frame:

  • Can collapse inside your gutter.
  • Can ‘droop’ down into your gutter and collect debris.
  • Cannot withstand heavy amounts of debris.
  • Shorter lifespan and may have to replace gutter guard.
  • Does not hold pitch well over time due to fragile construction.


Stainless Steel Mesh Filter
Advantages of Gutterglove's Stainless Steel Mesh

Advantages of Gutterglove’s Stainless Steel Mesh:

  • Stronger, rigid and more durable than others.
  • Highest fine density wire than any other fine mesh wire gutter guards.
  • Only allows dust and water to pass through.
  • Will outlast other wire mesh gutter guards.
  • More resistant to the weather elements.
  • Will take a heavier impact better.

Dis-Advantages of Other Stainless Steel Mesh Gutter Guards:

  • Tear’s easier. You can actually rip theirs with your bare hands.
  • Some mesh is so fragile, that it tears during the manufacturing process. You can see the mesh is torn and ripped in photos below.
  • Clogs from asphalt shingle petroleum oils on inside and simulated miters.
  • Easily damaged by heavier falling tree debris.
  • Shorter life span.

Eliminates gutter cleaning forever!
Filters out all debris from your gutter!
First Stage filter in rain harvesting systems!
Barely visible from the ground!

No rain gutter clogs ever!
Fits on any gutter type!
Fits on any roof type!
Filters over 150 inches of hourly rain!

Gutterglove Pro Junior
Fits on:
2″ to 3.5″ gutters
5 feet
Gutterglove Pro Standard
Fits on:
4″ to 5.5″ gutters
5 feet
Gutterglove Pro Super
Fits on:
5.5″ to 7.5″ gutters
5 feet
first step in rain water harvesting Gutter Glove Fits All Roof Types
QuoteGutterglove Pro GalleryFAQ

Gutterglove Pro / Gutterglove Ultra / Gutterglove Icebreaker:

Gutterglove Pro, Gutterglove Ultra and
Gutterglove IceBreaker consists of two components, a perforated aluminum
channel and type 316 stainless steel mesh. The stainless steel mesh is
glued into grooves along both sides of each 5 foot aluminum channel
section. It installs on any existing gutter. Gutterglove’s
specifications were designed so that it simply slips under the roof
shingles and fits snuggly to the front lip of your gutter. Gutterglove
should be installed at the same pitch as the roof (up to 5/12) to get
the best performance of debris shedding off. However, it’s not necessary to install Gutterglove at greater then a 30 degree pitch.

Aluminum Channel Frame:
Aluminum Channel Frame: The extruded aluminum
support frame is anodized to further protect itself from the environment
and to make it more adaptable to be installed on a copper gutter. The
anodizing process converts the aluminum surface into an extremely hard,
durable, corrosion resistant, long-lasting aluminum oxide finish.
Anodizing also responds favorably to current governmental regulations
because it is one of the most environmentally friendly industrial
processes. Since this process is a reinforcement of a naturally
occurring oxide process, it is non-hazardous and produces no harmful or
dangerous by products. Anodized aluminum is used around the world as
highly durable exteriors in commercial buildings such as one of the
world’s tallest buildings, the Sears Tower in Chicago, Illinois. Other
revolutionized uses are in scientific instruments, home appliances,
satellites in space for harsh environmental protection, staircases in
skyscrapers and a host of other uses.

Gutterglove is the ONLY gutter guard in existence that uses an anodized extruded aluminum profile.

Stainless Steel Mesh:
The super-strong type 316 stainless steel mesh
allows more than 150 inches of hourly rainfall to filter through to your
gutter. Type 316 is molybdenum-bearing austenitic stainless steel which
is more resistant to general corrosion and pitting/crevice corrosion
than the conventional chromium nickel austenitic lower quality stainless
steels such at types 302 and 304 or any other standard stainless steel
alloys. The pots and pans manufacturers that are highly promoted at home
and garden shows for their non-corrosive attributes are only type 304
stainless steel.

The 316 alloy offers
higher creep, stress-to-rupture and tensile strength at elevated
temperatures. It also resists attack of marine and corrosive industrial
atmospheres which makes it an ideal component for Gutterglove. Type 316
stainless steel alloy is widely used in the food, marine and medical

How Gutterglove Gutter Guards Work First Stage in any water harvesting system
How Gutterglove Leaf Guards Work Gutterglove is the First Stage in Water Harvesting
A) Fine stainless steel mesh keeps out:

  • Pine Needles
  • Seed Pods
  • Tiny Insects
  • Roof Sand Grit
  • Leaves

Gutterglove is the first stage in any water harvesting system!

B) Gutterglove installs on all roof types:

  • Cedar Shake
  • Tile
  • Shingles
  • Flat Roofs

C) Anadized aluminum frame supports the stainless
steel mesh and channels rain water to the gutter system.

D) Gutterglove can be installed on your existing rain gutters.



A) Leaves, pine needles, seed pods and roof sand roll off mesh

Gutterglove is the first stage in any water harvesting system!

B) Only rain water filters through to your grain gutters, you
will never have to clean your gutters again.

C) Gutterglove has the thickest frame
support of any competitor

D) Gutterglove can filter over 150 inches of hourly rain fall

gutter glove abc news review


Seamless Gutters Adds Value to Your Home.

Contact Us for a Estimate, Servicing Greater Milwaukee County and Waukesha County.

Share →